As shown by the instructions and the videos of the above links, and by the following pictures, the PlyGo stand is easy to use and designed for ultra-portability: it is foldable in its middle section, by the little central plate, and it has 2 arms and 4 legs that rotate and fold too.

   Release the two knobs on the little central plate, unfold and align the left and the right sides of PlyGo , and re-tighten the knobs.
   Rotate and open the legs of one side, and set them at the desired angle. Repeat the operation on the other side, and then unfold the arms.

   The PlyGo stand is unfolded and ready to use in less than 30 seconds: unfold and align the two transversal bars, tighten them together, unfold the legs and chose their angle (30°,60°,90°, 120° or 150°, and consequent height, from 7,5 cm up to 24 cm), unfold the supporting arms, adjust the inclination of the base and tighten the nuts.

   Position your laptop, or tablet, or book, and further adjust the inclination of the base at your convenience. When first using PlyGo , you may wish to stick 4 of the supplied velcro strips under the laptop, and preferably wait 24 hours to let them adhere well.

   The smart design of the PlyGo stand and its high quality coupling elements ensure that it maintains its position and does not open or close when folded or in use.

   Although PlyGo was initially conceived mainly for allowing a comfortable use of laptops while lying in beds or sofas, it quickly adapted itself also to tablets, and also to . . . tables: indeed, by rotating by about 90° the supporting surface defined by the arms, tablets could also be held; and by changing the locking position of the legs, from their angle of 30° ("high position", 240 mm) to 60°, 90°, 120° or 150° ("low position“, 75 mm), PlyGo could be conveniently used on desks too, both with laptops and with tablets. Examples of these "standard" utilizations of PlyGo are shown in the following pictures; note in particular the presence of the small central plate and of its two knobs at the centre of PlyGo , around which the right and the left sides rotate and fold.

- A pair of anti-slip rubber surfaces, that in case of occasional utilization, allow to avoid the application of Velcros

- A pair of curved transparent surfaces, that allow to hold, or to turn, the pages of books.

- A pair of spacers, that allow to increase the height of the base formed by the arms, or that allow to create a space to hold large books.

- A pair of 24 cm long extensions that allow to greatly increase the height of the base and to use a laptop while standing.

   The PlyGo stand has a frame made of aluminium that is lean, but also strong, fit for purpose for all kinds of possible utilizations, and meant to last for years.

that will identify with you the substitute part(s) required (see the full parts-range in the picture here on the right), let you know the price(s), and ship to you what is required.